CD74FCT273E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 70 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74FCT273E Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. A package named Tubeincludes it. In the configuration, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Through Hole. A supply voltage of 4.75V~5.25V is required for operation. It is operating at a temperature of 0°C~70°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74FCTseries of FPGAs. You should not exceed 70MHzin its output frequency. The element count is 1 . A total of 20terminations have been recorded. The 74FCT273family includes it. A voltage of 5V is used to power it. It belongs to the family of electronic devices known as FCT. It is mounted by the way of Through Hole. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. In order for the device to operate, it requires 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. With a current output of 48mA , it offers maximum design flexibility. This D latch consumes 8μA quiescent current at all.
CD74FCT273E Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT273E Applications
There are a lot of Texas Instruments CD74FCT273E Flip Flops applications.
- Modulo – n – counter
- Memory
- Latch
- Counters
- High Performance Logic for test systems
- Dynamic threshold performance
- Balanced Propagation Delays
- Patented noise
- Event Detectors
- Frequency Divider circuits
