CD74FCT374M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 6.6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74FCT374M96E4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74FCT series. There should be no greater frequency than 70MHzon its output. The list contains 1 elements. There is a consumption of 8μAof quiescent energy. It has been determined that there have been 20 terminations. The 74FCT374family includes it. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 10pF farads. An electronic device belonging to the family FCTcan be found here. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. High efficiency requires the supply voltage to be maintained at 5V. The output current of 48mA makes it feature maximum design flexibility. It operates with 3 output lines. The number of input lines is 8.
CD74FCT374M96E4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT374M96E4 Applications
There are a lot of Texas Instruments CD74FCT374M96E4 Flip Flops applications.
- Count Modes
- Digital electronics systems
- Memory
- Safety Clamp
- Pattern generators
- Cold spare funcion
- Memory
- QML qualified product
- ESD performance
- Automotive
