CD74FCT843AM96
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT843 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 9 |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 9 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.048 A |
| Independent Circuits | 1 |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
CD74FCT843AM96 Overview
Package 24-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the way in which it is packaged. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 4.75V~5.25V. It is 0°C~70°C at the operating temperature. The 74FCT series of FPGAs is the one this FPGA belongs to. An electronic part with 9 bits is designed. In this device, there are 24 terminations that have been designed. 74FCT843 is the family name of it. A 5V voltage supply is required for operation. The 24 pind are equipped with it. This electronic device belongs to the family of FCT. 24 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.25V. There are 5V power supplies attached to it. It is recommended to have a higher supply voltage (Vsup) than 4.75V. Based on its reliable performance, this device is suitable for TAPE AND REEL. The output current of 48mA makes it feature maximum design flexibility. There are 9 output lines that correspond to the binary equivalents of the input line. There is also WITH CLEAR AND PRESET characteristics to it.
CD74FCT843AM96 Features
24-SOIC (0.295, 7.50mm Width) package
74FCT series
9 Bits
74FCT843 family
24 pin count
24 pins
5V power supplies
CD74FCT843AM96 Applications
There are a lot of Texas Instruments CD74FCT843AM96 Latches applications.
- Multi-line decoders
- Digital bus buffer
- Parallel Output
- Synchronous frequency dividers
- Automotive ADAS
- Data acquisition
- Parallel-to-Serial Data Conversion
- Ring counter
- Frequency
- Shift register
