CD74HC107M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 170 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC107M96G4 Overview
In the form of SOIC, it has been packaged. The element count is 2 . There have been 14 terminations. A voltage of 4.5V provides power to the D latch. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. Its clock edge trigger type is Negative Edge. The part is included in FF/Latches. This flip flop is designed with 2 Bits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It has 1 output lines to operate. It consumes 4μA current. It is set to -5.2mAfor the high level output current. There is 5.2mA output current at the low level. A temperature below 125°Cshould be used for operation. It is recommended that the operating temperature be greater than -55°C. The system operates with a minimum supply voltage of 2V. It supports a maximum supply voltage of 6V volts. This frequency can be achieved 60MHz. In this case, it uses a J-K FLIP-FLOP logic IC. There are 2 functions available on the JK flip flop. The D latch is equipped with 14 pins. This flip flop features a maximum design flexibility due to its output current of 5.2mA.
CD74HC107M96G4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC107M96G4 Applications
There are a lot of Texas Instruments CD74HC107M96G4 Flip Flops applications.
- ESD protection
- Patented noise
- Clock pulse
- Matched Rise and Fall
- QML qualified product
- Frequency Divider circuits
- Control circuits
- Safety Clamp
- Supports Live Insertion
- Data Synchronizers
