CD74HC107MG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC107 |
| Function | Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 170 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 29ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC107MG4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. Package Tubeembeds it. This output is configured with Differential. Negative Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. In this case, the operating temperature is -55°C~125°C TA. JK Typedescribes this flip flop. It belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 60MHz. A total of 14terminations have been recorded. If you search by 74HC107, you will find similar parts. Power is supplied from a voltage of 4.5V volts. This JK flip flop has a 10pFfarad input capacitance. An electronic device belonging to the family HC/UHcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 14 pins. This device has Negative Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. Its flexibility is enhanced by 2 circuits. The output current of 5.2mA makes it feature maximum design flexibility. As a result, it consumes 4μA of quiescent current without being affected by external factors.
CD74HC107MG4 Features
Tube package
74HC series
14 pins
CD74HC107MG4 Applications
There are a lot of Texas Instruments CD74HC107MG4 Flip Flops applications.
- Data Synchronizers
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- Event Detectors
- Synchronous counter
- Patented noise
- Convert a momentary switch to a toggle switch
- QML qualified product
- Communications
