CD74HC107MTE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC107 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 170 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 29ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
CD74HC107MTE4 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Differential. It is configured with a trigger that uses Negative Edge. Surface Mountis occupied by this electronic component. Powered by a 2V~6Vvolt supply, it operates as follows. -55°C~125°C TAis the operating temperature. This electronic flip flop is of type JK Type. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 60MHz. Terminations are 14. Members of the 74HC107family make up this object. An input voltage of 4.5Vpowers the D latch. Its input capacitance is 10pF farads. A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Negative Edge. This device has the base part number FF/Latches. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. Its flexibility is enhanced by 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. It offers maximum design flexibility with its output current of 5.2mA. Quiescent current is consumed by the D latch in the amount of 4μA.
CD74HC107MTE4 Features
Tape & Reel (TR) package
74HC series
14 pins
CD74HC107MTE4 Applications
There are a lot of Texas Instruments CD74HC107MTE4 Flip Flops applications.
- Storage Registers
- Single Down Count-Control Line
- Control circuits
- Computers
- Set-reset capability
- Buffer registers
- Clock pulse
- ATE
- Registers
- Balanced Propagation Delays
