CD74HC109MT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD74HC109MT Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis used in the operation. It belongs to the type JK Typeof flip flops. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 60MHzin terms of its output frequency. Despite external influences, it consumes 4μAof quiescent current. A total of 16 terminations have been made. If you search by 74HC109, you will find similar parts. An input voltage of 4.5Vpowers the D latch. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the HC/UHfamily. Surface Mount mounts this electronic component. The 16pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. With an output current of 5.2mA, this device offers maximum design flexibility.
CD74HC109MT Features
Tape & Reel (TR) package
74HC series
16 pins
CD74HC109MT Applications
There are a lot of Texas Instruments CD74HC109MT Flip Flops applications.
- Asynchronous counter
- Matched Rise and Fall
- Divide a clock signal by 2 or 4
- QML qualified product
- Guaranteed simultaneous switching noise level
- Shift Registers
- Latch
- Data storage
- Buffer registers
- Control circuits
