CD74HC112PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop, JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 53 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC112PWRE4 Overview
The flip flop is packaged in TSSOP. As part of the package Tape & Reel (TR), it is embedded. A total of 2elements are contained within it. Terminations are 16. It is powered from a supply voltage of 4.5V. Electronic devices of this type belong to the HC/UHfamily. There is an electronic component mounted in the way of Surface Mount. 16pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. This RS flip flops is a part number FF/Latches. The design is based on 2bits. Considering the reliability of this T flip flop, it is well suited for TR. To operate, the chip has a total of 1 output lines. 4μAquiescent current consumed. There is -5.2mA output current at the high level. There is 5.2mA output current at the low level. Temperatures below 125°Care ideal for operating. It is recommended that the operating temperature be greater than -55°C. It operates with the minimal supply voltage of 2V. 6Vis its maximum supply voltage. The frequency can be set to 60MHz. It adopts a logic IC of type J-K FLIP-FLOP. It has 2 functions. With 16 pins, it is equipped with a low power consumption. In addition to its maximum design flexibility, the output current of the flip flop is 5.2mA.
CD74HC112PWRE4 Features
Tape & Reel (TR) package
16 pins
2 Bits
2 Functions
16 pin count
CD74HC112PWRE4 Applications
There are a lot of Texas Instruments CD74HC112PWRE4 Flip Flops applications.
- Latch-up performance
- Frequency division
- 2 – Bit synchronous counter
- Test & Measurement
- QML qualified product
- Digital electronics systems
- Control circuits
- Set-reset capability
- EMI reduction circuitry
- Single Up Count-Control Line
