CD74HC112PWRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC112PWRG4 Overview
As a result, it is packaged as TSSOP. A total of 2elements are present in it. Currently, there are 16 terminations. A voltage of 4.5V is used to power it. In this case, the D flip flop belongs to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 16. It has a clock edge trigger type of Negative Edge. This part is included in FF/Latches. 2bits are used in its design. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It has 1 output lines to operate. As a result, it consumes 4μA of quiescent current without being affected by external factors. In this case, the high level output current is set to -5.2mA. 5.2mA is the low level output current. It is recommended that the operating temperature be lower than 125°C. Temperatures above -55°Cshould be used. It is powered by 2V as its minimum supply voltage. In this case, it supports a maximum supply voltage of 6V. We are able to achieve a frequency of 60MHz. In this case, it uses a J-K FLIP-FLOP logic IC. There are 2 functions available on the JK flip flop. It has 16 pins. It features maximum design flexibility due to the 5.2mA output current.
CD74HC112PWRG4 Features
16 pins
2 Bits
2 Functions
16 pin count
CD74HC112PWRG4 Applications
There are a lot of Texas Instruments CD74HC112PWRG4 Flip Flops applications.
- Data transfer
- Asynchronous counter
- Buffer registers
- Single Up Count-Control Line
- Shift Registers
- Load Control
- Safety Clamp
- Computing
- Circuit Design
- Digital electronics systems
