CD74HC123PW
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RETRIGGERABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 25ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 54 ns |
| Family | HC/UH |
| Logic Function | Multivibrator |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | Monostable |
| Rise Time | 400ns |
| Output Polarity | COMPLEMENTARY |
| Power Supply Current-Max (ICC) | 0.08mA |
| Schmitt Trigger Input | No |
| Number of Data/Clock Inputs | 2 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
CD74HC123PW Overview
16-TSSOP (0.173, 4.40mm Width) cases package it.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There are two logic types for this part, Logic Type A and Logic Type B.During the period of 2V~6V, it is supplied with the required amount of votes.This electrical component is included in the 74HC series.There is a minimum operating temperature that cannot be exceeded by this part.Multivibrator causes 5.2mA 5.2mA low,high output current.74HC123 is the basis for the design of the component.Total 16 terminations are present.Multivibrator is possible for the device to handle the 4.5V voltage.This device has a clock input and a data input.As a whole, there are ten 16 pins on this part.A member of the HC/UH family, it has a number of characteristics.Multivibrator is possible to mount 16 pins on this part if you wish.In this case, the device is mounted by Surface Mount.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.As a result, quiescent current is consumed at 8μA.5V volts of voltage is required to run this chip.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.IC chips have a total number of bits of 2, which is the total number of bits on the chip.Additional features of the part can be found by searching: RETRIGGERABLEThe power supply current is suggested to run under 0.08mA.
CD74HC123PW Features
in 16-TSSOP (0.173, 4.40mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74HC
based on 74HC123
Supply Voltage: 4.5V
Quiescent Current at 8μA
output current at 5.2mA
2 bits
CD74HC123PW Applications
There are a lot of Texas Instruments CD74HC123PW applications of multivibrators.
- Pulse shaping
- Video Analytics Servers
- GPS: Personal Navigation Devices
- Network Attached Storage (NAS)
- Timing clrcults
- Embedded PCs
- Server PSU
- Frequency discriminators
- AV Receivers
- Digital Video Cameras (DVC)
