banner_page

CD74HC137E

16 Terminations2V~6V 16 Pin 74HC137 Signal switch74HC Series 8 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HC137E
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 432
  • Description: 16 Terminations2V~6V 16 Pin 74HC137 Signal switch74HC Series 8 Outputs1 Functions(Kg)

Details

Tags

Parameters
Power Dissipation 60W
Number of Bits 8
Propagation Delay 270 ns
Quiescent Current 8μA
Turn On Delay Time 270 ns
Family HC/UH
Logic Function Decoder, Demultiplexer
Number of Inputs 3
Current - Output High, Low 5.2mA 5.2mA
Supply Type Single
Bandwidth 28MHz
Max I(ol) 0.0052 A
Voltage Supply Source Single Supply
Input Conditioning LATCHED
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature -55°C~125°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Decoder/Demultiplexer
Subcategory Decoder/Drivers
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 4.5V
Terminal Pitch 2.54mm
Base Part Number 74HC137
Pin Count 16
Number of Outputs 8
Circuit 1 x 3:8
Polarity Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 1
Load Capacitance 50pF

CD74HC137E Overview


Due to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube is the method used for packaging.Digital switch ic uses a Through Hole mounting method.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.As a member of 74HC series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74HC137, which can also be used to find its logic switch related parts.The multiplexer is supplied with 4.5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.In this case, the supply type is Single.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Through Hole.I would like to refer to the logic switch as a member of the HC/UH family.As a result, signal multiplexer provides 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 2/6V.As a result, the turn signal switch consists of 8 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Without external influences, it consumes 8μA current of multiplexer ic.It has 3 inputs.For the normal operation of the device, 1 circuits must be formed.

CD74HC137E Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 2/6V

CD74HC137E Applications


There are a lot of Texas Instruments CD74HC137E Signal Switches / Multiplexers / Decoders applications.

  • Electronic circuits
  • Solenoid cooling fan
  • Electronically controlled engine system
  • HDMI applications
  • Transmission from the computer system of a satellite
  • Memory system of computers
  • Robotic vehicles
  • Electronics industry
  • Home automation system
  • Data communication

Write a review

Note: HTML is not translated!
    Bad           Good