CD74HC137PWR
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC137 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 270 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 270 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | LATCHED |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
CD74HC137PWR Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74HC series.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74HC137, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 4.5V.A component pin count of 16 can be found on this turn signal switch.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.As a result, signal multiplexer provides 8 bits.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.Normally, 2/6V is powered by a battery.This turn signal switch has 8 outputs designed for its operation.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 8μA current of multiplexer ic.This multiplexer provides 3 inputs.According to TR, the switches is packaged.The configuration of the mux switch contains 1 elements.
CD74HC137PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC137PWR Applications
There are a lot of Texas Instruments CD74HC137PWR Signal Switches / Multiplexers / Decoders applications.
- CNC machines
- Signal router
- Paper plants
- Data demultiplexing
- Telephone network
- Data collection system
- GLAN
- Control unit of Central Processing unit (CPU)
- Speed synchronization of multiple motors in industries
- Automatic Monitoring systems
