Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
TWO ACTIVE LOW AND ONE ACTIVE HIGH ENABLE INPUTS |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Pin Count |
16 |
Number of Elements |
1 |
Polarity |
Inverting |
Temperature Grade |
MILITARY |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Propagation Delay |
30 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
265 ns |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Supply Type |
Single |
Bandwidth |
28MHz |
Logic IC Type |
OTHER DECODER/DRIVER |
Max I(ol) |
0.004 A |
Prop. Delay@Nom-Sup |
45 ns |
High Level Output Current |
-5.2mA |
Low Level Output Current |
5.2mA |
Number of Input Lines |
3 |
Number of Output Lines |
8 |
Input Conditioning |
STANDARD |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD74HC138M96G4 Overview
This is a relatively small item of digital switch that is included in the SOIC in order to save space on the board.The package is packaged in the manner of Tape and Reel.It is designed with 16 terminations as part of its basic configuration.In multiplexer's system, 4.5V is the voltage supplied.This turn signal switch has a total of 16 component pins.Conductors terminate at GULL WING in this design.This supply type employs Single.Currently, it is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.In the HC/UH family, the logic switch is included.This is a signal switch that is categorized as Decoder/Drivers.No external influence consumes 8μA current of multiplexer ic.In order to accept voltage levels, the multiplexers have input lines 3 on the board.A signal source is provided by 8 output lines.In this case, operating this signal switch at 125°C is acceptable.A temperature of the multiplexer of -55°C should be maintained for minimal operation.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 6V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 2V.Additionally, TWO ACTIVE LOW AND ONE ACTIVE HIGH ENABLE INPUTS has improved characteristics.In mux switch configuration, there are 1 elements.For its logic, IC OTHER DECODER/DRIVER is used.
CD74HC138M96G4 Features
Supplied in the SOIC package
Adopting a supply type of Single
3 input lines
8 output lines
TWO ACTIVE LOW AND ONE ACTIVE HIGH ENABLE INPUTS
OTHER DECODER/DRIVER as the logic IC
CD74HC138M96G4 Applications
There are a lot of Texas Instruments CD74HC138M96G4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Microprocessor input/output systems
- Data distribution
- Textile mills
- Logic circuits
- Data-routing applications
- Telephone network
- Arithmetic Logic Units
- Decimal decoder
- Recording transmission