Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Cut Tape (CT) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Subcategory |
Decoder/Drivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Base Part Number |
74HC139 |
Pin Count |
16 |
Number of Outputs |
4 |
Circuit |
1 x 2:4 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
1 |
Load Capacitance |
50pF |
Number of Bits |
4 |
Throw Configuration |
DP4T |
Propagation Delay |
220 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
220 ns |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Bandwidth |
28MHz |
Prop. Delay@Nom-Sup |
36 ns |
Power Supply Current-Max (ICC) |
0.08mA |
Number of Input Lines |
2 |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC139M96 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74HC series.Its basic configuration includes terminations in the 16 range.In addition, it also has a base part number of 74HC139, which can be used to find related parts.The multiplexer's system works with 4.5V voltage.This turn signal switch contains 16 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.The board is configured with 16 pins.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.There are 4 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Keeping Vsup at 6V will prevent some unnecessary failures.In order for the turn signal switch to work, there are 4 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Without the influence of external factors, it consumes 8μA current of multiplexer ic.The switches packaging is based on TR.To accept voltage levels, the multiplexers have2 input lines.Normally, the digitalswitch consists of 1 circuits.
CD74HC139M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
2 input lines
CD74HC139M96 Applications
There are a lot of Texas Instruments CD74HC139M96 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Implementing boolean functions with multiple variables
- HD surveillance system
- Used to connect a single source to multiple destinations
- Small scale TV wall
- Analog, digital or video signal switching
- Electronic circuits
- Medium scale TV wall
- Make full adder
- Enabling block of memory depending on address in memory chips