Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Pin Count |
16 |
Number of Elements |
2 |
Polarity |
Inverting |
Temperature Grade |
MILITARY |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Throw Configuration |
DP4T |
Propagation Delay |
220 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
220 ns |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Supply Type |
Single |
Bandwidth |
28MHz |
Logic IC Type |
OTHER DECODER/DRIVER |
High Level Output Current |
-5.2mA |
Low Level Output Current |
5.2mA |
Number of Output Lines |
4 |
Input Conditioning |
STANDARD |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD74HC139ME4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.As a result, it is packaged in the way of Rail/Tube.As parts of its basic configuration, 16 terminations are desgined.The multiplexer is supplied with 4.5V voltage.A component pin count of 16 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of HC/UH.The digital switch ic is an electronic part classified into Decoder/Drivers.Without the influence of external factors, it consumes 8μA current of multiplexer ic.A signal source is provided by 4 output lines.Signal switch operation at 125°C temperature is acceptable.Ideally, the temperature of the multiplexer should not exceed -55°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 6V.The digital swith is specified to operate at the minimum supply voltage of 2V in compliance with the applicable device specification.In the mux switch configuration, there are 2 elements.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
CD74HC139ME4 Features
Supplied in the SOIC package
Adopting a supply type of Single
4 output lines
OTHER DECODER/DRIVER as the logic IC
CD74HC139ME4 Applications
There are a lot of Texas Instruments CD74HC139ME4 Signal Switches / Multiplexers / Decoders applications.
- Data communication
- CPU memory location identification
- To select different devices in microprocessor output
- Microprocessor instruction decoding
- Telephone network
- High-performance memory systems
- Make full adder
- Home automation system
- Idle motor
- D/A converters