CD74HC147M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Priority Encoder |
| Subcategory | Arithmetic Circuits |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC147 |
| Pin Count | 16 |
| Circuit | 1 x 10:4 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Number of Inputs | 9 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Prop. Delay@Nom-Sup | 32 ns |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC147M96 Overview
It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC Priority Encoder is used.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74HC series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.There is a base part number of 74HC147 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 4.5V.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of HC/UH.As a result, signal multiplexer provides a total of 10 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.This is a signal switch that is categorized as Arithmetic Circuits.This multiplexer is equipped with 9 inputs and 9 outputs.The switches package is packaged in accordance with the TR method.The signal source consists of 4 output lines.
CD74HC147M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
4 output lines
CD74HC147M96 Applications
There are a lot of Texas Instruments CD74HC147M96 Signal Switches / Multiplexers / Decoders applications.
- Logic gates for other digital devices
- Communication system
- Idle motor
- Electronics industry
- A robotic vehicle with the metal detector
- Make full adder
- Automation system
- Code conversion
- Textile mills
- Arithmetic Logic Units
