CD74HC147MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 9 |
| Propagation Delay | 13 ns |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Number of Inputs | 9 |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Logic IC Type | ENCODER |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 10 |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC147MG4 Overview
Digital switch is provided in the SOIC for the purpose of saving board space.It is designed with 16 terminations as part of its basic configuration.For multiplexer's system, a voltage of 4.5V is supplied.Currently, this turn signal switch has a total of 16 component pins.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.In the HC/UH family, the logic switch is included.Signal multiplexer contains 9 bits.In electronic terms, the digital switch ic is classified as Arithmetic Circuits.The multiplexer is equipped with 9 inputs.In order to accept voltage levels, the multiplexers have input lines 10 on the board.A signal source has 4 output lines.The maximum operating temperature of 125°C is acceptable for this signal switch.Maintaining a minimum operating temperature of the multiplexer of -55°C is recommended.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 6V.A minimum supply voltage of 2V is specified for the digital swith by its applicable specification.The logic IC of the digitalswitch is ENCODER.
CD74HC147MG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
10 input lines
4 output lines
ENCODER as the logic IC
CD74HC147MG4 Applications
There are a lot of Texas Instruments CD74HC147MG4 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Code conversion
- Combinational circuit
- Code converters
- RF-based home automation system
- Frequency multiplexing system
- Audio transmission
- Used to connect a single source to multiple destinations
- HDMI applications
- Memory chips
