Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Termination |
SMD/SMT |
Type |
Priority Encoder |
Subcategory |
Arithmetic Circuits |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Base Part Number |
74HC147 |
Pin Count |
16 |
Max Output Current |
5.2mA |
Circuit |
1 x 10:4 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Bits |
10 |
Propagation Delay |
13 ns |
Family |
HC/UH |
Logic Function |
Multiplexer |
Number of Inputs |
9 |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Bandwidth |
28MHz |
Output Polarity |
TRUE |
Max I(ol) |
0.0052 A |
Prop. Delay@Nom-Sup |
32 ns |
Power Supply Current-Max (ICC) |
0.08mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Number of Output Lines |
4 |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC147MT Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.The multiplexers uses an analog IC Priority Encoder as the analog part of the circuit.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74HC147, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 4.5V volts.This turn signal switch has a total of 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.There are 16 pins on it.It is mounted in the way of Surface Mount.The HC/UH family includes the logic switch.In this signal multiplexer, there are 10 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.The power supply of 2/6V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Arithmetic Circuits category.There are 9 inputs provided in this multiplexer.A TR packaging method is used in the switches.Signal source consists of 4 output lines.
CD74HC147MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
4 output lines
CD74HC147MT Applications
There are a lot of Texas Instruments CD74HC147MT Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Enabling different rows of memory depending on address in memory chips
- Combinational circuit
- Make full adder
- To select different devices in microprocessor input
- Arithmetic Logic Units
- Memory system of computers
- Medical industry
- Computer memory
- Electronically controlled engine system