CD74HC147PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Priority Encoder |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC147 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 10:4 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Number of Inputs | 9 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Prop. Delay@Nom-Sup | 32 ns |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC147PW Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tube.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Priority Encoder is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.As its base part number is 74HC147, logic switch can also be used to find its related parts.The multiplexer's system is powered by 4.5V voltage.This turn signal switch contains 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.Signal multiplexer provides 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.Normally, 2/6V is powered by a battery.In electronic terms, the digital switch ic is classified as Arithmetic Circuits.A multiplexer such as this has 9 inputs available.As a signal source, there are 4 output lines.
CD74HC147PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
4 output lines
CD74HC147PW Applications
There are a lot of Texas Instruments CD74HC147PW Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- Code conversion
- LVDS
- Medical industry
- Combinational circuit
- Implementing boolean functions with multiple variables
- Telephone network
- Small scale TV wall
- Audio transmission
- War field flying robot with a night vision flying camera
