banner_page

CD74HC147PWR

16 Terminations2V~6V 16 Pin 74HC147 Signal switch74HC Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HC147PWR
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 808
  • Description: 16 Terminations2V~6V 16 Pin 74HC147 Signal switch74HC Series 1 Functions(Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Base Part Number 74HC147
Pin Count 16
Circuit 1 x 10:4
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Bits 10
Propagation Delay 13 ns
Family HC/UH
Logic Function Multiplexer
Number of Inputs 9
Current - Output High, Low 5.2mA 5.2mA
Supply Type Single
Bandwidth 28MHz
Output Polarity TRUE
Max I(ol) 0.0052 A
Prop. Delay@Nom-Sup 32 ns
Power Supply Current-Max (ICC) 0.08mA
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 4
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Priority Encoder
Subcategory Arithmetic Circuits
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING

CD74HC147PWR Overview


As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Priority Encoder is used.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.In addition, it also has a base part number of 74HC147, which can be used to find related parts.In multiplexer's system, 4.5V is the voltage supplied.Signal switch has 16 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The logic switch object belongs to the family of HC/UH.Signal multiplexer consists of 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.It is provided that 2/6V has a power supply in order to function normally.I would classify the digital switch ic as an electronic part belonging to the Arithmetic Circuits category.This multiplexer provides 9 inputs.The switches package is packaged in accordance with TR.There are 4 output lines designed to serve as the source of the signal.

CD74HC147PWR Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
4 output lines

CD74HC147PWR Applications


There are a lot of Texas Instruments CD74HC147PWR Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor instruction decoding
  • Enabling block of memory depending on address in memory chips
  • GLAN
  • RF-based home automation system
  • Metal detectors
  • A/D converters
  • Computer memory
  • Encrypted communications system
  • PCIe
  • Data-routing applications

Write a review

Note: HTML is not translated!
    Bad           Good