CD74HC151M
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 43 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
CD74HC151M Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.The package is in the form of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74HC series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 16 terminations.The part number for 74HC151 can be used to find its logic switch related parts as well.For multiplexer's system, 4.5V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.As a result, signal multiplexer provides a total of 8 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch has 1 outputs.To accept voltage levels, the multiplexers have2 input lines.
CD74HC151M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
2 input lines
CD74HC151M Applications
There are a lot of Texas Instruments CD74HC151M Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Data communication
- Memory chips
- PCIe
- Data-routing applications
- Idle motor
- Code conversion
- D/A converters
- Microprocessor input/output systems
- Logic circuits
