CD74HC151M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 950mW |
| Number of Bits | 8 |
| Propagation Delay | 31 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Prop. Delay@Nom-Sup | 43 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC151M96 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Cut Tape (CT) method.Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Multiplexers from the 74HC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 74HC151, which can be used to find related parts.For multiplexer's system, 4.5V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.With 16 pins, it is configured.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.As a result, signal multiplexer provides a total of 8 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.As a result, the turn signal switch consists of 1 outputs.In accordance with TR, switches can be packaged.It is possible to accept voltage levels through 2 input lines of multiplexers.A normal operation of the digitalswitch requires 1 circuits.
CD74HC151M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
2 input lines
CD74HC151M96 Applications
There are a lot of Texas Instruments CD74HC151M96 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Microprocessor input/output systems
- RF-based home automation system
- CNC machines
- Data demultiplexing
- LVDS
- PCIe
- Code converters
- Implementing boolean functions with multiple variables
- Data distribution
