CD74HC151MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 31 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 43 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC151MT Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Multiplexer is used.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.As its base part number is 74HC151, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemThis turn signal switch has 16 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.Currently, it is configured with a 16 pin configuration.It is mounted in the way of Surface Mount.The logic switch belongs to the family of HC/UH.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.This turn signal switch has 1 outputs designed for its operation.The switches package is packaged in accordance with TR.The multiplexers have2 input lines on the board that accept voltage levels.
CD74HC151MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
2 input lines
CD74HC151MT Applications
There are a lot of Texas Instruments CD74HC151MT Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Steel plants
- LVDS
- Enabling different rows of memory depending on address in memory chips
- Make full adder
- To select different devices in microprocessor input
- Analog, digital or video signal switching
- Medical industry
- Enabling block of memory depending on address in memory chips
- Make half adder
