CD74HC154M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Additional Feature | 2 ENABLE INPUTS |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC154 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Circuit | 1 x 4:16 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 16 |
| Propagation Delay | 44 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC154M Overview
This is a relatively small item of digital switch that is included in the 24-SOIC (0.295, 7.50mm Width) in order to save space on the board.It is packaged according to the Tube method.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.The basic configuration of this system includes 24 terminations.In addition, it also has a base part number of 74HC154, which can be used to find related parts.For multiplexer's system, a voltage of 4.5V is supplied.A component pin count of 24 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.This multiplexer ic has 24 pins configured.Surface Mount is the way it is mounted.The HC/UH family includes the logic switch.Signal multiplexer contains 16 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.For mux switch's normal operation, there is a power supply provided at 2/6V.This turn signal switch has 16 outputs designed for its operation.This is a signal switch that is categorized as Decoder/Drivers.Without the influence of external factors, it consumes 8μA current of multiplexer ic.It is provided with 4 inputs.It also provides improved characteristics of 2 ENABLE INPUTS.In order for the digitalswitch to function normally, it has 1 circuits.
CD74HC154M Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
2 ENABLE INPUTS
CD74HC154M Applications
There are a lot of Texas Instruments CD74HC154M Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Steel plants
- Electronically controlled engine system
- VGA
- Arithmetic Logic Units
- Automatic health monitoring systems
- HD surveillance system
- To select different devices in microprocessor input
- Frequency multiplexing system
- Automation system
