CD74HC157M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 21 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC157M96 Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74HC series.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74HC157 which can also be used to find its logic switch related parts.The multiplexer is supplied with 4.5V voltage.Signal switch has 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.There are 2 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.As part of the operation of this turn signal switch, there are 1 outputs.This multiplexer provides 8 inputs.The switches packaging is based on TR.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
CD74HC157M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
CD74HC157M96 Applications
There are a lot of Texas Instruments CD74HC157M96 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Logic gates for other digital devices
- D/A converters
- Data demultiplexing
- A robotic vehicle with the metal detector
- Idle motor
- HDMI applications
- Robotic vehicles
- VGA
- Data transfer
