CD74HC161MT
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 315 ns |
| Turn On Delay Time | 315 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | TCO OUTPUT |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
CD74HC161MT Overview
16-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. There are 16terminations used for configuring it. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. An interconnection of 1elements is provided by wires. The number of all component pins is 16. As [0], it is packaged. A circuit is connected to other components by 16pins. To mount it, use the method of [0]. Initially, it appears to belong to the HC/UH family. The 74HCseries offers a wide range of applications due to its versatility. Binary Counteris adopted as the logic type. -55°C~125°Cshould be the operating temperature. The mounting type is Surface Mount. In the case of a supply voltage of [0], it operates more reliably. The array contains elements that store 4bits each. It is possible for the result to be noin Pbfree code. It is important to note that in regards to this electronic device, TCO OUTPUTis an extremely significant feature. More related parts are available under its base part number 74HC161. It is packed with [0]. The voltage source produces 2/6Vvoltage. There is a minimum supply voltage (Vsup) of 2V volts. It operates with the frequency of 35MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup).
CD74HC161MT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Frequency of 35MHz
CD74HC161MT Applications
There are a lot of Texas Instruments CD74HC161MT Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Decade counter/decimal decode display (CD4017B）
- Analog multiplexing and demultiplexing
- Clocks
- VHF, UHF, FM, AM, etc.
- Fixed and programmable counters greater than 10
- Time Out Timer for Consumer-Application Industrial Controls
- Counter control/timers
- Frequency division
- Digital multiplexing and demultiplexing
