CD74HC173M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.0078 A |
| Max Propagation Delay @ V, Max CL | 34ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 60 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC173M Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 2V~6Vvolts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HC series. A frequency of 60MHzshould be the maximum output frequency. The list contains 1 elements. There is 8μA quiescent consumption. There have been 16 terminations. The 74HC173 family contains it. An input voltage of 4.5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. This board has 16 pins. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. It is designed with a number of bits of 4. It reaches 6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. This T flip flop features a maximum design flexibility due to its output current of 7.8mA. It is designed with 3 output lines. It has 2lines. In addition, you can refer to the additinal WITH DUAL OUTPUT ENABLE of the D latch. 4 channels are available.
CD74HC173M Features
Tube package
74HC series
16 pins
4 Bits
CD74HC173M Applications
There are a lot of Texas Instruments CD74HC173M Flip Flops applications.
- Balanced Propagation Delays
- Counters
- Buffer registers
- QML qualified product
- Balanced 24 mA output drivers
- Data storage
- Safety Clamp
- Cold spare funcion
- Frequency division
- Circuit Design
