CD74HC174M96
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 50 ns |
| fmax-Min | 20 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
CD74HC174M96 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. There should be no greater frequency than 35MHzon its output. A total of 1 elements are present. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 5V. There is 10pF input capacitance for this T flip flop. It is a member of the HC/UHfamily of D flip flop. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V.
CD74HC174M96 Features
Tape & Reel (TR) package
74HC series
CD74HC174M96 Applications
There are a lot of Rochester Electronics, LLC CD74HC174M96 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Circuit Design
- Buffer registers
- Single Up Count-Control Line
- ESCC
- Latch
- Computing
- Pattern generators
- Cold spare funcion
- Bounce elimination switch
