CD74HC174M96E4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Number of Circuits | 7 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 6 |
| Prop. Delay@Nom-Sup | 50 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC174M96E4 Overview
SOICis the packaging method. It is contained within the Tape & Reel (TR)package. D latch consists of 1 elements. A total of 16terminations have been recorded. Power is supplied from a voltage of 4.5V volts. A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. Due to its superior flexibility, it uses 7 circuits. Considering the reliability of this T flip flop, it is well suited for TR. This D latch consumes 8μA quiescent current at all. It is also characterized by DUMMY VAL. The high level output current is set to -5.2mA. 5.2mAis set as the low level output current. The operating temperature should be lower than 125°C. It is recommended that the operating temperature is higher than -55°C. The minimum voltage required for operation is 2V. It supports a maximum supply voltage of 6V volts. We are able to achieve a frequency of 35MHz. This logic IC is D FLIP-FLOP. There are 1 functions available on this T flip flop. 16pins are available on this JK flip flop. 5.2mA provides maximum design flexibility due to its output current.
CD74HC174M96E4 Features
Tape & Reel (TR) package
16 pins
1 Functions
16 pin count
CD74HC174M96E4 Applications
There are a lot of Texas Instruments CD74HC174M96E4 Flip Flops applications.
- ESD performance
- Memory
- Supports Live Insertion
- Count Modes
- Asynchronous counter
- Latch-up performance
- Registers
- Patented noise
- Circuit Design
- Power down protection
