CD74HC174M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC174M96G4 Overview
The item is packaged in SOICcases. There are 1 elements in it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. An input voltage of 4.5Vpowers the D latch. It belongs to the family of electronic devices known as HC/UH. Electronic part Surface Mountis mounted in the way. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. As a result, it consumes 8μA of quiescent current without being affected by external factors. Furthermore, it has DUMMY VALas a characteristic. High level output current is set to -5.2mA. A 5.2mAvalue is set for low-level output current. A temperature below 125°Cis recommended for operation. Ideally, the operating temperature should be higher than -55°C. Initially, it requires a voltage of 2V as the minimum supply voltage. There is a maximum supply voltage of 6V. It is possible to achieve a frequency of 35MHz. The logic IC it uses is D FLIP-FLOP. There are 1 functions available on the JK flip flop. There are 16 pins on the D latch. As a result of its output current of 5.2mA, it is very flexible in terms of design.
CD74HC174M96G4 Features
16 pins
1 Functions
16 pin count
CD74HC174M96G4 Applications
There are a lot of Texas Instruments CD74HC174M96G4 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Instrumentation
- Bus hold
- Computing
- High Performance Logic for test systems
- Latch
- CMOS Process
- ATE
- Differential Individual
