CD74HC174ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Number of Circuits | 7 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC174ME4 Overview
In the form of SOIC, it has been packaged. A total of 1elements are contained within it. It has been determined that there have been 16 terminations. An input voltage of 4.5Vpowers the D latch. It is a member of the HC/UHfamily of D flip flop. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. The superior flexibility of this circuit is achieved by using 7 circuits. This D latch consumes 8μA quiescent current at all. In addition, DUMMY VALis a characteristic of it. It is set to -5.2mAfor the high level output current. In the low level output current setting, 5.2mAis used. If the operating temperature is lower than 125°C, it is recommended. It is recommended that the operating temperature is higher than -55°C. Normally, it operates with a voltage of 2VV as its minimum supply voltage. It supports a maximum supply voltage of 6V volts. The frequency that can be achieved is 35MHz. It adopts a logic IC of type D FLIP-FLOP. As a result, it is equipped with 1 functions . A total of 16 pins are present on this device. It offers maximum design flexibility with its output current of 5.2mA.
CD74HC174ME4 Features
16 pins
1 Functions
16 pin count
CD74HC174ME4 Applications
There are a lot of Texas Instruments CD74HC174ME4 Flip Flops applications.
- Buffer registers
- ESD performance
- Patented noise
- Clock pulse
- Single Down Count-Control Line
- 2 – Bit synchronous counter
- Memory
- Instrumentation
- ESCC
- Computers
