CD74HC174MT
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Reach Compliance Code | unknown |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 250 ns |
| fmax-Min | 24 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | DUMMY VAL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
CD74HC174MT Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. Its output frequency should not exceed 35MHz. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power source is powered by 4.5V. There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. It is also characterized by DUMMY VAL.
CD74HC174MT Features
Tape & Reel (TR) package
74HC series
CD74HC174MT Applications
There are a lot of Rochester Electronics, LLC CD74HC174MT Flip Flops applications.
- Supports Live Insertion
- Data storage
- Load Control
- Communications
- Registers
- Individual Asynchronous Resets
- Bus hold
- Computing
- EMI reduction circuitry
- Frequency division
