CD74HC175E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 53 ns |
| fmax-Min | 20 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HC175E Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. It is contained within the Tubepackage. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Through Hole. The JK flip flop operates at 2V~6Vvolts. In the operating environment, the temperature is -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74HCseries of FPGAs. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There have been 16 terminations. A voltage of 5V is used to power it. This JK flip flop has a 10pFfarad input capacitance. In this case, the D flip flop belongs to the HC/UHfamily. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
CD74HC175E Features
Tube package
74HC series
CD74HC175E Applications
There are a lot of Rochester Electronics, LLC CD74HC175E Flip Flops applications.
- Control circuits
- EMI reduction circuitry
- Set-reset capability
- Synchronous counter
- Balanced 24 mA output drivers
- Communications
- Shift Registers
- Clock pulse
- Load Control
- Computers
