CD74HC175MT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 265 ns |
| fmax-Min | 23 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
CD74HC175MT Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. Currently, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 35MHz. In total, there are 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 16 terminations. Power is supplied from a voltage of 4.5V volts. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HC/UH. The maximal supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V.
CD74HC175MT Features
Tape & Reel (TR) package
74HC series
CD74HC175MT Applications
There are a lot of Rochester Electronics, LLC CD74HC175MT Flip Flops applications.
- Storage Registers
- QML qualified product
- Bounce elimination switch
- Load Control
- Data storage
- Power down protection
- Communications
- Computers
- Control circuits
- Dynamic threshold performance
