CD74HC192E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 24MHz |
| Base Part Number | 74HC192 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Propagation Delay | 330 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 330 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Counter, Decade |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC192E Overview
A device of this type is supplied in a package of type [0]. The configuration of this device is based on 16terminations. The supply voltage of 4.5V enables it operate in a fully flexible way. In this diagram, there are 1elements that are interconnected by wires. In all, there are 16 pins on each component. Tubeis the packaging method used for this package. In the circuit, 16pins are used to connect other components. It is mounted in the way of [0]. In this case, it emerges as a member of the HC/UH family. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. In this case, the logic type is set to [0]. Ideally, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. When the supply voltage is set to [0], it is able to operate with greater reliability. Each element in the array stores 4 bits. A major feature of this electronic device is its [0]. Further related parts can be found under its base part number 74HC192. From the voltage source, there is a voltage of 2/6V volts. Supply voltages can be as low as 2V volts (Vsup). 24MHzis the frequency of operation. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts. Quiescent current is consumed at 8μA.
CD74HC192E Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 24MHz
CD74HC192E Applications
There are a lot of Texas Instruments CD74HC192E Counters & Dividers applications.
- Frequency dividers
- Counter control/timers
- Dual Up Counters
- SQUARING
- counting/frequency sy nthesizers-BCD output
- Frequency dividing circuits
- Time delay circuits
- Binary counter/decoder
- VHF, UHF, FM, AM, etc.
- POWER COMPUTATION
