CD74HC192NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 24MHz |
| Base Part Number | 74HC192 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 330 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Counter, Decade |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC192NSR Overview
It is a device supplied in the 16-SOIC (0.209, 5.30mm Width) package. In order to configure it, it uses 16terminations. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. The 1elements are connected by wires. There are 16pins on all components. In this case, it is packaged as Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. In this case, it appears as a member of the family [0]. Due to its membership in the 74HCseries, it is suitable for a variety of applications. A logic type of Counter, Decade is adopted. It is recommended that the operating temperature be set to -55°C~125°C. Using a Surface Mountmounting type, it is mounted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array stores 4bits in each element. Based on Pbfree code, this may result in yes. Among the features of this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare essential. Further related parts may be found under the base part number 74HC192. It is packed by [0]. The voltage source produces 2/6Vvoltage. The minimum supply voltage (Vsup) is 2V. 24MHzis the frequency of operation. A maximum supply voltage (Vsup) is available up to 6V. The current consumed is 8μA when there are no external factors.
CD74HC192NSR Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 24MHz
CD74HC192NSR Applications
There are a lot of Texas Instruments CD74HC192NSR Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- LINEARIZATION
- Control counters
- Timing applications
- SQUARE ROOT
- Communications Digital Frequency Synthesizers;
- Analog multiplexing and demultiplexing
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- TRUE RMS-TO-DC CONVERSION
- VHF, UHF, FM, AM, etc.
