Parameters |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Termination |
SMD/SMT |
Additional Feature |
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Frequency |
24MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC192 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Elements |
1 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Bits |
4 |
Propagation Delay |
330 ns |
Quiescent Current |
8μA |
Reset |
Asynchronous |
Family |
HC/UH |
Logic Function |
Counter |
Direction |
Up, Down |
Logic Type |
Counter, Decade |
Max I(ol) |
0.0052 A |
Trigger Type |
Positive Edge |
Power Supply Current-Max (ICC) |
0.08mA |
Clock Edge Trigger Type |
Positive Edge |
Timing |
Synchronous |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
CD74HC192PWT Overview
In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. In order to configure it, it uses 16terminations. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. In wires, 1elements are connected. There are a total of 16 pins in all components. Tape & Reel (TR)is used to package it. In the circuit, 16pins are used to connect other components. Surface Mountis the way in which it is mounted. It is included in the HC/UHfamily. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. The logic type of Counter, Decade is adopted. It is recommended to set the operating temperature to -55°C~125°C. In this case, it is mounted with a Surface Mounttype. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. The are 4 bits information in the device. Based on Pbfree code, this may result in yes. In regard to this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare essential features. Further related parts may be found under the base part number 74HC192. TR is employed for its packing. As a result of the voltage source, there is 2/6V voltage. There is 2V minimum supply voltage (Vsup) for this device. It operates with the frequency of 24MHz. The maximum supply voltage (Vsup) is up to 6V. In the state of [0], it consumes quiescent current. The 4channels are used to configure the foundation of the system.
CD74HC192PWT Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 24MHz
CD74HC192PWT Applications
There are a lot of Texas Instruments CD74HC192PWT Counters & Dividers applications.
- SQUARE ROOT
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARING
- MULTIPLICATION
- Time-delay circuits
- Binary counter/decoder
- Divide-by-N counting
- Fixed or Programmable Frequency Division
- POWER COMPUTATION
- Time delay circuits