CD74HC237M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC237 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 270 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | LATCHED |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC237M Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HC series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74HC237, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemThere are 16 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.The mounting point is Surface Mount.The logic switch belongs to the family of HC/UH.In this signal multiplexer, there are 8 bits provided.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.For the turn signal switch's operation, there are 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without the influence of external factors, it consumes 8μA current of multiplexer ic.In this multiplexer, there is a total of 3 inputs.The mux switch configuration contains 1 elements.
CD74HC237M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC237M Applications
There are a lot of Texas Instruments CD74HC237M Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- High-performance memory-decoding applications
- Automation system
- Solenoid cooling fan
- Steel plants
- Encrypted communications system
- War field flying robot with a night vision flying camera
- Make half adder
- Injectors
- Automatic Monitoring systems
