CD74HC237ME4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 270 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 270 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| Max I(ol) | 0.0052 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Input Conditioning | LATCHED |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC237ME4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.The package is packaged in the manner of Rail/Tube.The basic configuration of this system includes 16 terminations.In this case, 4.5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.In this signal multiplexer, there are 8 bits that are provided.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Without any external influences, it consumes 8μA current of multiplexer ic at all times.On the multiplexers, 3 input lines are provided for accepting voltage levels.A signal source consists of 8 output lines.It is acceptable for this signal switch to operate at the maximal temperature of 125°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -55°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 6V.Typical device specifications specify a voltage supply of 2V for the digital swith.It contains 1 elements in mux switch configuration.IC OTHER DECODER/DRIVER is used for the logic of this chip.
CD74HC237ME4 Features
Supplied in the SOIC package
Adopting a supply type of Single
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
CD74HC237ME4 Applications
There are a lot of Texas Instruments CD74HC237ME4 Signal Switches / Multiplexers / Decoders applications.
- Relay
- PCIe
- Seven segment displays
- Enabling block of memory depending on address in memory chips
- Steel plants
- Computer memory
- Textile mills
- Time division multiplexing system
- Analog, digital or video signal switching
- Automatic health monitoring systems
