Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Base Part Number |
74HC238 |
Pin Count |
16 |
Number of Outputs |
8 |
Circuit |
1 x 3:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
1 |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
30 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
265 ns |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
3 |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Bandwidth |
28MHz |
Max I(ol) |
0.0052 A |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC238M Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74HC238 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 4.5V voltage.Signal switch has 16 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.In this signal multiplexer, there are 8 bits that are provided.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.In order for 2/6V to operate normally, a power supply is provided.There are 8 outputs designed for the operation of the turn signal switch.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.In the absence of external influences, it consumes 8μA current of multiplexer ic.It has 3 inputs.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.
CD74HC238M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC238M Applications
There are a lot of Texas Instruments CD74HC238M Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- High-performance memory-decoding applications
- Arithmetic Logic Units
- Data bus control
- Speed control of medern motors
- Used to connect a single source to multiple destinations
- Transmission from the computer system of a satellite
- Relay
- Data-routing applications
- Electronically controlled engine system