CD74HC238M96E4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC238 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC238M96E4 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.The multiplexers from 74HC series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74HC238 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 4.5V is supplied.There are 16 component pins in this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.There are 8 bits in signal multiplexer.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.There is a power supply provided for the mux switch's normal operation of 2/6V.The turn signal switch has 8 outputs designed for operation.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Without external influences, it consumes 8μA current of multiplexer ic.It has 3 inputs.The switches packaging is based on TR.A configuration element for the mux switch consists of 1 elements.
CD74HC238M96E4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC238M96E4 Applications
There are a lot of Texas Instruments CD74HC238M96E4 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Microprocessor instruction decoding
- HDMI applications
- Electronic circuits
- Computer memory
- Recording transmission
- Decimal decoder
- Electronically controlled engine system
- Enabling different functions units in microprocessor instruction decoding
- Medium scale TV wall
