CD74HC238M96G4
| Parameters | |
|---|---|
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC238 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
CD74HC238M96G4 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74HC series.Its basic configuration includes terminations in the 16 range.There is a base part number 74HC238 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 4.5V voltage.A component pin count of 16 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.Signal multiplexer provides 8 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.Normally, 2/6V is powered by a battery.As a result, the turn signal switch consists of 8 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Without external influences, it consumes 8μA current of multiplexer ic.This multiplexer provides 3 inputs.According to TR, the switches is packaged.In the mux switch configuration, there are 1 elements.
CD74HC238M96G4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC238M96G4 Applications
There are a lot of Texas Instruments CD74HC238M96G4 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Data distribution
- Logic circuits
- Video transmission
- Electronic circuits
- PCIe
- Relay
- Microprocessor input/output systems
- Implementing boolean functions with multiple variables
- Metal detectors
