CD74HC238MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC238 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 5.2mA |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC238MT Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74HC series can be used for a wide range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74HC238 may also be used.The multiplexer's system is powered by 4.5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.A configuration of 16 pins is used.It is mounted in the way of Surface Mount.In the HC/UH family, the logic switch is included.There are 8 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.For mux switch's normal operation, power supply 2/6V is provided.The turn signal switch contains 8 outputs designed to operate.The digital switch ic is an electronic part classified into Decoder/Drivers.In the absence of external influences, it consumes 8μA current of multiplexer ic.The multiplexer provides 3 inputs.The switches package is packaged in accordance with TR.The configuration of the mux switch contains 1 elements.
CD74HC238MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC238MT Applications
There are a lot of Texas Instruments CD74HC238MT Signal Switches / Multiplexers / Decoders applications.
- Logic gates for other digital devices
- Data-routing applications
- Make half adder
- Microprocessor instruction decoding
- To select different devices in microprocessor input
- Encrypted communications system
- Make full adder
- Night vision cameras
- Code converters
- Used to connect a single source to multiple destinations
