CD74HC251MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 53 ns |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 2 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC251MG4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.Among its basic features are 16 terminations.The multiplexer's system is supplied with a voltage of 4.5V.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.The board has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.The turn signal switch contains 1 outputs designed to operate.This multiplexer has 8 inputs.The switches package is packaged in accordance with TUBE.A voltage level can be inserted into the 2 input lines of multiplexers.The turn signal switch's circuit consists of 1 transmission channels.In this case, operating this signal switch at 125°C is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -55°C.It is specified that the signal switches should operate at 6V as its maximum supply voltage.A minimum supply voltage of 2V is required to operate the digital swith.
CD74HC251MG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
2 input lines
CD74HC251MG4 Applications
There are a lot of Texas Instruments CD74HC251MG4 Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- HD surveillance system
- Code conversion
- Data transfer
- Enabling block of memory depending on address in memory chips
- To select different devices in microprocessor output
- Transmission from the computer system of a satellite
- A/D converters
- Memory system of computers
- Automatic health monitoring systems
