CD74HC251MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC251 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 30 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC251MT Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.Several applications are possible for 74HC series multiplexers.It is designed with 16 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74HC251.The multiplexer's system works with 4.5V voltage.There are 16 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.In this signal multiplexer, there are 2 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch has 1 outputs.The multiplexer is equipped with 8 inputs.The switches package is packaged in a way which is consistent with TR.
CD74HC251MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
CD74HC251MT Applications
There are a lot of Texas Instruments CD74HC251MT Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- VGA
- High-performance memory-decoding applications
- Solenoid cooling fan
- Computer memory
- Arithmetic Logic Units
- Analog, digital or video signal switching
- Medium scale TV wall
- Recording transmission
- GLAN
