CD74HC253M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 30 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 35 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC253M Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Multiplexer as the analog IC.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.As a member of 74HC series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.The part number for 74HC253 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 4.5V.A component pin count of 16 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.There are 4 bits signal multiplexer provides.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.As part of the operation of this turn signal switch, there are 1 outputs.There are 8 inputs provided in this multiplexer.Transmission is carried out over 2 channels in the turn signal switch's circuit.
CD74HC253M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
CD74HC253M Applications
There are a lot of Texas Instruments CD74HC253M Signal Switches / Multiplexers / Decoders applications.
- GLAN
- High-performance memory-decoding applications
- CPU memory location identification
- Arithmetic Logic Units
- Make half adder
- Data transfer
- War field flying robot with a night vision flying camera
- Memory system of computers
- HDMI applications
- Electronically controlled engine system
