CD74HC253MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 30 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 35 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC253MT Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.As a member of 74HC series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74HC253 may also be used.The multiplexer's system is supplied with a voltage of 4.5V.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.As a result, signal multiplexer provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch contains 1 outputs designed to operate.This multiplexer has a total of 8 inputs.The switches package is packaged in a way which is consistent with TR.This turn signal switch's circuit uses 2 transmission channels.
CD74HC253MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
CD74HC253MT Applications
There are a lot of Texas Instruments CD74HC253MT Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Medical industry
- Enabling different rows of memory depending on address in memory chips
- Automatic Monitoring systems
- LVDS
- Signal router
- Night vision cameras
- Microprocessor input/output systems
- Analog to digital conversion
- To select different devices in microprocessor output
