CD74HC257M96
| Parameters | |
|---|---|
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
CD74HC257M96 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Several applications are possible for 74HC series multiplexers.Among its basic features are 16 terminations.As its base part number is 74HC257, logic switch can also be used to find its related parts.In this case, 4.5V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.A total of 16 pins are configured on this board.The mounting point is Surface Mount.There is a family of HC/UH members.There are 2 bits signal multiplexer provides.Vsup should be kept at 2V to prevent some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.The turn signal switch has 1 outputs designed for operation.This multiplexer has a total of 8 inputs.The switches packaging is based on TR.For transmission, there are 4 channels in the turn signal switch's circuit.
CD74HC257M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
CD74HC257M96 Applications
There are a lot of Texas Instruments CD74HC257M96 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- HDMI applications
- To select different devices in microprocessor input
- Used to connect a single source to multiple destinations
- A robotic vehicle with the metal detector
- Steel plants
- Make half adder
- Decimal decoder
- RF-based home automation system
- Data demultiplexing
