CD74HC259M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Propagation Delay | 280 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC259M96 Overview
Package 16-SOIC (0.154, 3.90mm Width) includes it. As a result, it has a packaging of Cut Tape (CT). In this configuration, the output is set to Standard. This electrical device has the logic type D-Type, Addressable. The way in which this electronic part is mounted is Surface Mount. A voltage of 2V~6V is used as the supply voltage for this device. There is a temperature of -55°C~125°C at which the system operates. It is a type of FPGA belonging to the 74HC series. This electronic part is designed with 8 Bits. The device consists of 16 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74HC259. The device is operated when the supply voltage is set to 4.5V. 16 pins are provided. In terms of electronic devices, this one is in the HC/UH family. It is designed with 16 pins. Mounting this electronic component follows the Surface Mount method. This part is included in FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be greater than 2V. There are 1 input lines in which electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TR. It features maximum flexibility in design due to 5.2mA output current. To achieve its exceptional flexibility, it relies on 2 circuits.
CD74HC259M96 Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
CD74HC259M96 Applications
There are a lot of Texas Instruments CD74HC259M96 Latches applications.
- Up/down difference counting
- Parallel-to-Serial Data Conversion
- Counting
- Bus system register with enable parallel lines at bus side
- Parallel Input
- Counter control
- Parallel Input
- Counter timers
- OC-48 communication systems
- Parallel data storage
