Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Pin Count |
16 |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Temperature Grade |
MILITARY |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Current - Output |
5.2mA |
Number of Bits |
8 |
Propagation Delay |
31 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
13 ns |
Family |
HC/UH |
Logic Function |
D-Type |
Logic IC Type |
D LATCH |
Max I(ol) |
0.004 A |
Prop. Delay@Nom-Sup |
56 ns |
Trigger Type |
LOW LEVEL |
High Level Output Current |
-5.2mA |
Low Level Output Current |
5.2mA |
Number of Output Lines |
8 |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD74HC259MG4 Overview
A package called SOIC contains it. A package of Rail/Tube has been used. There are 8 bits in this electronic part. This device has 16 terminations. The device is operated when the supply voltage is set to 4.5V. There are 16 pins attached to it. It is a member of the HC/UH family of electronic devices. 16 pins are used in its design. It is mounted according to the Surface Mount method. There is a subcategory of FF/Latches for this part. There are 8 output lines that correspond to the binary equivalents of the input line. It consumes 8μA of quiescent current without being affected by outside factors. There are 1 elements in it. There is 5.2mA low level output current set. -5.2mA is set as the high level output current. Lower than 125°C is the recommended operating temperature. It is recommended to operate at a temperature higher than -55°C. It is capable of providing a maximum supply voltage of 6V. The minimal voltage for operation is 2V. D LATCH is the logic IC it uses. The output current of 5.2mA makes it feature maximum design flexibility.
CD74HC259MG4 Features
SOIC package
8 Bits
16 pin count
16 pins
1 elements
CD74HC259MG4 Applications
There are a lot of Texas Instruments CD74HC259MG4 Latches applications.
- Multistage ripple counting
- Display
- Parallel Input
- Four-bit storage with output enable
- Synchronous frequency dividers
- OC-48 communication systems
- Bus system register with enable parallel lines at bus side
- Relay replacement
- Buffer/Storage Registers
- Shift left with parallel loading